Schrack

Transformator de curent 60/5A, 30x10, clasă 3

SKU: MG954006-A ISBN: 9004840027037
In stoc furnizor Termenul de livrare va fi comunicat dupa plasarea comenzii

Unitate de ambalare: 1 buc.

Cantitate minima pentru comanda: 1 buc.

Ai vazut mai ieftin?

Spune-ne unde ai vazut mai ieftin acest produs

RON
Contacteaza Woltram
Transformator de curent 60/5A, 30x10, clasă 3
81,23 lei
Caracteristică Valoare
disipare 7,00 W
Tip Push-through current transformers
DIN rail TH35-15 (EN60715)
Conexiune ##
Accesorii opționale MGX20006--;MGX20306--;MGX20406--
Rated dynamic current Idyn 2.5Ith
PROMO CODE GER INDUSTRY 7037-00007-49
Accuracy classes ##
Gama de temperatură - Funcţionare -25 la +50 °C
Max. Operating voltage Um 0.72kV r.m.s.
Domeniul de frecvenţă 47 - 63Hz
Short-time current Ith < 60Ipr
Reference temperature 23°C ±1°C °C
Terminale externe CAD 1
Unitate de ambalare 1 m.
Condiţii climatice Suitable for tropical climate
Carcasă ##
Clasă 3
Umiditate relativă ≤ 85 %
PREG 2330
Thermal rated continuous current according to EN60044-1 ##
Masă g 260
Temperatura maximă a mediului ambiant 85 °C
Notă The converter is not allowed to be operated with open secondary side, because this leads to a dangerous overvoltage at the secondary side and overheating of the converter!!! (EN60044-1/A2);Therefore, when disconnecting the measuring device, meter or power analyzer, short-circuit the secondary side.
Torque busbar fixing: 0,2Nm
Rated current primary side Ipr 60 A
Metodă de montaj snap-on DIN rail 35 mm;screwable for wall mounting
Working conditions ##
Gama de temperatură - Transport/Depozitare -40 to +85 °C
Descriere electrică CAD 60/5A, 30x10mm
Bare colectoare maxim 30x10
Burden Class 3 (2.5VA)
Simbol CAD P
Decupaj mm 30x10 mm
Daily average temperature ≤ 30°C
Specifications ##
Rated current secondary side Isr 5A
Winding secondary side Screw terminals
Thermal power loss ≤ 7W at Icth;125°C Maximum temperature cable/busbar.
Fabricant Schrack
PROMO CODE CH 7037-0014-73
Load current error For class 3 and 100% In: ±3%;For class 3 and 120% In: ±3%
Safety factor ≤ 5
DECUPAJ mm 30x10
Curent primar 60 A
Rated frequency 50 Hz
grad de protecţie IP20
Winding primary side Continuous cable
Insulation requirements ##
Housing material Polycarbonate, self-extinguishing;Class V0 according to UL-94
Masă netă 0,26 kg/m
Temperatura minimă a mediului ambiant -25 °C
Categorie produs Normal installation (DIN EN 61869-2)
LxBxH mm 61x56x80
Standard produs EN 61869-2
Terminal labeling Winding primary side P1(K) - P2(L);Winding secondary side s1(k) - s2(l)
Isolation Class B (EN60044-1)
COD COMANDĂ MG954006-A
Intended use for copper bars up to 30 x 10mm;for cables up to diameter 27mm
Isolation test voltage 3 kV R.M.S. 50 Hz/1min
Versiune Dry type transformer, air insulation
COD PROMO 7037-0008-86

Fise tehnice

Descarca fise tehnice produs