| Caracteristică | Valoare | 
|---|---|
| Curent primar | 800 A | 
| Tip | Push-through current transformers | 
| COD COMANDĂ | MG956080-A | 
| disipare | 16,00 W | 
| Conexiune | ## | 
| Bare colectoare maxim | 60x10 | 
| HxBxT mm | 130x90x48 | 
| Accuracy classes | ## | 
| DECUPAJ mm | 50x30 | 
| Unitate de ambalare | 1 m. | 
| PROMO CODE CH | 9098-0040-28 | 
| Carcasă | ## | 
| PREG | 2330 | 
| Decupaj mm | 50x30;60x10 mm | 
| DESCRIERE2 | Transformator de curent 800/5A | 
| Notă | The converter is not allowed to be operated with open secondary side, because this leads to a dangerous overvoltage at the secondary side and overheating of the converter!!! (EN60044-1/A2);Therefore, when disconnecting the measuring device, meter or power analyzer, short-circuit the secondary side. | 
| Temperatura maximă a mediului ambiant | 60 °C | 
| Rated current secondary side Isr | 5A | 
| Housing material | Polycarbonate, self-extinguishing | 
| Fabricant | Schrack | 
| Montaj | by fixing screws on the busbar | 
| Burden | Class 0.5 (6VA);Class 1 (8VA);Class 3 (10VA) | 
| Rated frequency | 50 Hz | 
| Clasă | 0,5 | 
| LxÎxA mm | 90x130x48 | 
| Masă g | 500 | 
| Masă netă | 0,47 kg/m | 
| Rated current primary side Ipr | 800 A | 
| Temperatura minimă a mediului ambiant | -25 °C | 
| Standard produs | EN 61869-2 | 
| Winding secondary side | Screw terminals M4;Faston 4,8x0,8mm | 
| PROMO CODE GER INDUSTRY | 9098-00022-06 | 
| Intended use | for copper bars up to 50 x 30mm;for copper bars up to 60 x 10mm | 
| grad de protecţie | IP00 terminals;IP20 with terminal cover | 
| COD PROMO | 9098-0024-22 | 
 
             
 
 
